TetonUser manual

SafetyRespond to a fall1.12

Respond to a fall alarm

What to do when a fall alarm comes in, and when it wasn't a fall.

Carers
Nurses and team leaders
Managers
3 clips

Respond

Clip 1.12aNo sound

When Teton detects a fall:

  1. 1The fall screen opens by itself.
  2. 2Tap On my way.
  3. 3Go to Margaret.
  4. 4Tap Resolve — all clear, then Resolve.

The fall screen shows who has fallen and where, a short clip of the fall, and what the sensor has seen since. On my way tells the rest of the team that you're going. It then shows You're on your way; if a colleague got there first, you see their name instead.

Resolve — all clear appears once Teton sees staff in the room with the resident. If the resident has got up and left the room, you see Resolve fall instead. If the clip couldn't be saved, the screen says Couldn't capture the fall clip and offers a digital check of the room in its place.

If it wasn't a fall

Clip 1.12bNo sound
  1. 1Tap Not a fall?
  2. 2Choose Safe to ground or Incorrect detection.
  3. 3The alarm closes for everyone.

Safe to ground means the resident lowered themselves to the floor on purpose. Incorrect detection means nothing happened. If you can't review falls in your role, you see one choice, Not a fall. You can still review the fall later, with its clip, on the web (see Review a fall).

If no one responds

Clip 1.12cWith sound
  1. 1The alarm sounds again.
  2. 2More staff are alerted.
  3. 3Then your home's contacts are told.

The fall screen shows what happens next. Re-alarm counts down to the next time the alarm sounds. Once more staff have been alerted, it says Alert sent to additional staff. If your home has set up contacts for unanswered falls, it says when they'll be told, then External contacts have been notified.

Good to know

  • Always respond to a fall alert in person.
  • If you're not sure, go and check in person.
  • The fall alarm keeps going until someone claims it or Teton sees staff in the room.